The MTS Advantage™ Screw Grip offers versatility and a high clamp force. This makes it especially good for applications where pneumatic grips do not provide sufficient clamping force. It works with servohydraulic and electromechanical machines and even accommodates the side insertion of specimens.
Side loading design » Suitable for use in environmental chambers
An alignment guide to ensure concentricity
Right or left hand operation
Ability to test lap shear specimens
Faces are compatible with pneumatic grips
Flexible mounting allows adapters to be easily changed
Accommodates threaded configurations
Approximately twice the clamp force of comparably rated pneumatic grips
Interchangeable, resilient pucks to allow follow-through action, to compensate for specimen neck-down, minimize damage to delicate specimens, and increase clamp load for difficult specimens
Can be used in a fixed (one side follows through) and non-fixed (both sides follow through) configuration
Room to hold flexible specimens above and below the faces
Knurled screw for hand tightening of specimen during installation
Low profile grip body increases test space
Faces pivot for self alignment and reduced likelihood of breakage at the specimen face contact
Temperature range of -129°C to 200°C (-200°F to 400°F) when using the aluminum version of the pucks described above.
MTS ADVANTAGE SCREW ACTION GRIPS
FORCE
CAPACITY
GRIP
WIDTH
WEIGHT
UPPER MOUNTING/
LOWER MOUNTING
PART NUMBER
0.01 kN '(2.25 lbf)
130 mm
'(5.1 in)
0.27 kg
'(0.80 lb)
Type Cm
'Type Dm
055-426-701
.2 kN '(45 lbf)
164 mm
'(6.5 in)
1 kg
'(2.2 lb)
Type Dm
'Type Dm
055-426-801
2 kN
'(450 lbf)
211 mm
'(8.3 in)
3.2 kg
'(7 lb)
Type Dm
'Type Dm
055-426-901
10 kN
'(2,250 lbf)
120.6 mm
'(8.29 in)
6.8 kg
'(15.0 lb)
Type Dm
'Type Dm
100-030-185
5 kN AND 10 kN GRIP FACES
FACE SURFACE
HEIGHT
WIDTH
PART NUMBER
Smooth
50 mm (2 in)
75 mm (3 in)
056-163-901
Corrugated
50 mm (2 in)
75 mm (3 in)
056-163-902
Serrated
50 mm (2 in)
75 mm (3 in)
056-163-903
Diamond
50 mm (2 in)
75 mm (3 in)
056-163-904
Rubber (matte)*
50 mm (2 in)
75 mm (3 in)
056-163-905
Rubber (corrugated)*
50 mm (2 in)
75 mm (3 in)
056-163-906
Rubber (smooth)*
50 mm (2 in)
75 mm (3 in)
056-163-907
Line Contact
20 mm (0.8 in)
75 mm (3 in)
056-163-908
Grab Test
50 mm (2 in)
75 mm (3 in)
056-163-909
Line Contact w/rubber opposite
50 mm (2 in)
75 mm (3 in)
056-163-910
*Rubber grip faces are for use at room temperature.
Ready for a quote or need more information? We're here to help.
Request a quote
We use necessary cookies to make our site work. We'd also like to set up optional analytics cookies to help us improve it. We won't set optional cookies unless you enable them.
We use necessary cookies to make our site work. We'd also like to set up optional analytics cookies to help us improve it. We won't set optional cookies unless you enable them.